FM H24-66 | ||
---|---|---|
Data Sheet Information Compiled by: JEAN-DENIS BACHAND | ||
New: 24 March 2006 | Drawing by: Jean-Denis Bachand | |
- | ||
Engine Builder: Fairbanks Morse | Engine: 2-cycle 38D8 1/8 (12 cylinder OP) | |
Bore & Stroke | 8" X 10" | |
RPM (Maximum / Minimum) | 850 / 400 | |
Main Generator: Westinghouse - WE498B | Horsepower: 2400 | |
Gear Ratio: 68:15 | Speed: 65 mph | |
Trucks: 6-Wheel | Configuration: C-C | |
Traction Motor Blowers: Belt Drive (1) | Model: Westinghouse Y201A | |
Weight: 388,400 lbs | Traction Motors: Westinghouse - WE370DE2 (six) | |
Tractive Effort (starting) 79,500 lbs @ 30% | Tractive Effort (continuous): 82,500 lbs @ 6.6 mph | |
Multiple Unit Capability: Yes | Dynamic Braking: Yes | |
Auxilary Generator: Westinghouse | Alternator: -- | |
Air Brake: Westinghouse | Model: 24RSL | |
Compressor: Westinghouse | Model: 3C2C | |
Quantity Built: 127 | Dates: 4/1953 to 6/1957 | |
- | - | |
Exterior Dimensions | H24-66 | |
Total Length | 66'-00" | |
Wheel Diameter | 42" | |
Truck Wheel Base | 13'-00" | |
Height to Top Engine Hood | 15'-00" | |
Height to Top Cab Hood | 15'-00" | |
Cab Width | 10'-04" | |
Top of Walkway | 7'-02.5" | |
Walkway Width | 3'-05.5" | |
Engine Hood Width | 10'-00" | |
Center Bolster | 41'-06" | |
Center Front Truck to Front Pilot | 2'-08" | |
Center Rear Tucrk to Rear Pilot | 2'-08" | |
Distance between Truck Centers | 53'-10" | |
Minimum Turning Radious | 29 degrees | |
- | - | |
Fuel Oil: 1800 | Lubricating Oil: 385 | |
Engine Cooling Water: 320 | Sand Capacity: 28 cu. ft. | |
Options: VApor Clarkson Boiler (800 lbs/hr) | ||
Reference Sources:
|